Scouting — The Steering Wheel
Getting Direction from Scouting
Recommendations for pest control are based on accurate field scouting. Without knowing what pests you have, it is impossible to know if, when, or with what you need to treat. Therefore, scouting drives the direction for pest control.
There is no one pesticide or combination of pesticides that will keep trees pest free. All pesticide applications have a cost — not just the cost of the material(s), but also the impact on natural predators and risks to environmental and human health. Often the best pest control is to do nothing at all, but you can safely do this only by accurately knowing what pests and predators are in your trees.
What is Scouting?
Scouting is the regular, systematic, and repeated sampling of pests in the field in order to estimate the presence of a pest and their population levels. Scouting is geared towards the major pest problems and is modified by weather that favors particular pests. In order for scouting to happen, you have to make time for it, just like you would for any other production practice. As you get more familiar with each field and learn where pest problems are found, scouting should take less and less of your time.
Part of scouting is to determine if certain pests such as elongate hemlock scale, balsam woolly adelgid or rosette buds are present at all in the field. Once you know these pests are present, scouting is needed to determine if enough trees are affected to warrant an insecticide application. For other pests which reproduce and spread more quickly such as twig aphids, Cinara aphids, spider mites and rust mites, scouting is needed to keep track of numbers so that the population doesn’t build to a level where it causes economic damage. While scouting, not only pests but natural predators are observed which should also be factored into the decision whether or not to treat. Once a pesticide has been applied, scouting is used to determine how well treatments worked.
Scouting is also important for ground cover management. Fields need to be thoroughly scouted to determine the presence of hard to control weeds, especially around field edges where such problems can get a foothold. Field observations of weed growth and regrowth are also important for timing of chemical suppression.
- A good quality magnifying lens with at least 7X power that you can see pests clearly with.
- White plastic plate or something similar to beat the foliage over.
- Flagging to mark problem trees. This should be of a color that is not used in tagging trees.
- Pocket knife to cut off bark samples.
- Clippers to cut off shoots and branches.
- Plastic bags to collect samples in.
- Marker to write on plastic bags the location and date when sample was taken.
- Camera to take photographs of problems. A cell phone camera may be adequate.
- GPS unit to mark location of problem areas so maps can be developed — again many phones have this feature.
- Map of the field so that problems can be recorded.
- Scouting form so that scouting results can be recorded.
- Shovel for digging in the soil to find grubs or other root problems.
- Soil sample probe, bucket and boxes to determine fertility needs.
How to Look for Pests
- Spotting tree symptoms. Tree symptoms of pest damage can be seen from many rows away. Be on the look-out for trees with crooked tops, dead branches, yellow or spotted foliage, white to grayish discoloration of the needles, or needle drop. Look for discolored needles back in the canopy in the lower half of the tree. Walk to suspect trees and examine the foliage to determine the cause of problems.
- Beating foliage. Hitting foliage forcibly with your hand over something like a white plastic plate will dislodge many pests and predators. This is the best way to monitor twig aphids and to find beneficial insects. Other pests that can be dislodged in this fashion are elongate hemlock scale adults and crawlers, spider mites, and rust mites. Be sure to use a magnifying lens to correctly identify insects.
- Picking a shoot. Some pest either can’t be dislodged from foliage or are found at lower numbers by examining tree shoots. Pick a small shoot of the most current growth from back in the canopy of the tree and look on both sides for mites, scales, twig aphid eggs, and woolly adelgid. Sometimes predators are also found in this way, especially predatory mites. To observe scales, look on the underside of foliage, and remove a branch with 2-3 year’s worth of growth. Look especially for parasitized scales indicated by a round hole in the center of female (brown) scales.
- Examining the bark. To find balsam woolly adelgid, examine the trunk of the tree and along the underside of branches. Cut-off suspect woolly spots with a pocketknife to look at them more closely with a magnifying lens.
- Digging in the soil. Some pests such as white grubs can only be found by digging in the soil. If a tree is stunted or dying, it is also a good idea to dig up roots to examine their condition. Root aphids can be found in this manner as well as roots infected with Phytophthora root rot or fed upon by grubs.
Writing Scouting Results
Keeping a written, systematic record of scouting results is key to incorporating scouting and IPM into your production practices. Records can take on many forms — everything from a large calendar where observations are noted, to a small notebook where journal entries are written, to computer spreadsheets. It doesn’t matter how you keep records of scouting, just so you do.
Additional Information on Scouting
For help in scouting Christmas trees, see Scouting Fraser Fir in North Carolina.